What to do if my floodlight camera cannot power on

TC53, TC55, Tapo C720

10-13-2022 14,610

С момента публикации этой статьи многое могло измениться. Посетите раздел «Поддержка» интересующей вас модели, выберите нужную аппаратную версию устройства и ознакомьтесь с добавленными в устройство изменениями в паспорте изделия или в примечаниях к выпускам прошивок.

Please consult or have it performed by a licensed electrician.

Make sure you have turned on the circuit breaker.
Check that the bracket and camera are firmly attached.

Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.

Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.

Reset the circuit breaker and verify wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult or have it performed by a licensed electrician.