How to navigate the Robot Vacuum to clean with the Remote Control

Tapo RV10, Tapo RV10 Lite, Tapo RV10 Plus, Tapo RV20, Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV20 Mop, Tapo RV20 Mop Plus, Tapo RV20 Plus, Tapo RV30, Tapo RV30 Max, Tapo RV30 Max Plus, Tapo RV30 Plus, Tapo RV30C, Tapo RV30C Mop, Tapo RV30C Plus

11-19-2024 2,353

Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device and check either the Datasheet or the firmware section for the latest improvements added to your product.

When cleaning a specific area of your home, you can use the remote control to move the Robot Vacuum to the target location.

*Here we take Tapo RV30 Max Plus as an example. App pages and features vary by model.

1. On the Tapo app's home page, tap the device card to access the device page.

The device card on the Robot Vacuum page.

2. Tap the menu icon on the top right corner. Tap “Remote Control”.

Note: When using the remote control, it is recommended that you connect your phone and Robot Vacuum to the same network. Otherwise, there may be delays.

Display the Remote Control position in the app.

3. You can navigate the robot vacuum by tapping the direction buttons to move it forward, left, or right. Enable “Turn On Cleaning” to start cleaning your home while you control its movement.

Remote control page with Spot Cleaning button, Dock button, Turn On Cleaning switch and arrow keys.

4. You can also use the following shortcut buttons to control the robot vacuum.

Tap "Spot Cleaning" to clean a rectangular area measuring 1.5 m × 1.5 m (4.9 ft × 4.9 ft) centered around the vacuum.

Tap "Dock" to send the robot vacuum back to its charging dock.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.