How to set detection zone for your Tapo Camera

TC41, TC53, TC55, TC82, TC82 KIT, Tapo C100, Tapo C101, Tapo C110, Tapo C110P2, Tapo C111, Tapo C120, Tapo C125, Tapo C200, Tapo C200P2, Tapo C201, Tapo C202, Tapo C210, Tapo C210P2, Tapo C212, Tapo C220, Tapo C222, Tapo C225, Tapo C310, Tapo C310P2, Tapo C320WS, Tapo C325WB, Tapo C400S2, Tapo C402, Tapo C402 KIT, Tapo C403, Tapo C410, Tapo C410 KIT, Tapo C420, Tapo C420S1, Tapo C420S2, Tapo C420S4, Tapo C425, Tapo C425 KIT, Tapo C500, Tapo C510W, Tapo C520WS, Tapo C720, Tapo D235

01-10-2024 19,430

Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device and check either the Datasheet or the firmware section for the latest improvements added to your product.

Note：

Different models have different support times and versions. Please pay attention to the official website for firmware updates.

The Detection Zone feature allows you to define a specific area that you want your Tapo Cam to detect. If you only need to monitor activities in a certain area, you can set custom detection zones to reduce unnecessary detections.

There are two types of detection zones:

Set for All: Monitor the same detection area for all detection types.

Set for Each: Monitor different detection areas for each detection type

Please follow the below steps to customize the detection zone for your Tapo Camera.

Case 1: Set for All

Step 1: Launch Tapo App, and pick the camera you would like to edit by selecting it to enter the live stream.

Step 2: Tap the Device Settings> Detection> Detection Zones.

Step3: Select Set for All and tap on Edit button to set the detection zones to only capture what happens in the set zones.

Step 4: Tap and drag the corners of the detection zones to change its shape. Personalize detection zones by adding, deleting, and clearing zones. Then save the changes.

Case 2: Set for Each

Step 1: Launch Tapo App, and pick the camera you would like to edit by selecting it to enter the live stream.

Step 2: Tap the Device Settings> Detection> Detection Zones.

Step3: Select Set for Each and tap on Edit button to set the detection zones to only capture what happens in the set zones.

Step 4: Select different detection types, tap and drag the corners of the detection zones to change its shape. Personalize detection zones by adding, deleting, and clearing zones. Then save the changes.