Tapo Video Doorbell Camera
| Tapo D235 V1Smart.Secure.Easy.
Always Know Who’s There
Video Doorbell Camera
Tapo D235
-
Hardwire & Battery
Power Supply -
Chime
Included -
IP66 Water &
Dust Resistance
Live View + Starlight Sensor
4:3 /180° filed of View 140°
Hardwire Supported 210 Day
Person / Pet / Vehicle / Package
2K 5MP Head-to-Toe 180° DFOV
Details matter, and with 2K 5MP clarity, D235 exceeds traditional Full HD resolution with finer details and incredible clarity. Experience the full picture with our 180° ultra-wide field of view, capturing every detail from head to toe in a single sweeping glance.
160°
Others brand
180°
Tapo D235
Various Power Supply Methods
Flexible Wedges, Flexible Views
Different wedge choices give users possibilities to make the doorbell suits more placement scenarios. Users can also use these wedges to adjust the views.
Local and Cloud Storage
Save recorded videos on the microSD Card* (up to 512 GB, purchased separately) or use Tapo Care cloud storage services (subscribe separately).
Up to
512 GB
Smart AI Detection and Notification
Smart AI identifies people, pets, vehicles, and packages, notifying users as needed.
Install Your Doorbell
Step 1
Option 1: Stick to the wall
Attach the included adhesive to the back of the bracket or the wedge you have selected. If you use the wedge, affix the bracket and the wedge with screws.
3M Adhesive
or
Mounting Wedge
Route the wires through the bracket (if there are existing wires) . Wipe off the dust from the surface using a dry cloth, stick the bracket with adhesive to the smooth wall, and press it down for 15 seconds to ensure the bracket is firmly attached.
or
Option 2: Mount to the wall
Route the wires (if there are existing wires) through the mounting template and stick the template. Drill two holes where indicated.
Φ=6 mm (15/64 in.)
Route the wires (if there are existing wires) through the bracket. Insert two anchors into the holes and use the screws to affix the bracket over the anchors.
Step 2 Mount the doorbell to the bracket
Option 1: Battery Powered
Mount the doorbell to the bracket.
Option 2: Hardwire Powered
Connect the wires to the doorbell and tighten the screws. Mount the doorbell to the bracket and turn on the circuit breaker.
If the wires are too short
Tapo App Support
- 1 Download the free app
- 2 Plug in and connect
- 3 Control from anywhere
Walk You Through Setup Step by Step
-
1
Download and open Tapo App -
2
Tap Plus (+) to add your smart device -
3
Look for your device and connect -
4
Name the device and choose the room it’s in -
5
Congratulations! You’ve now completed the configuration
Downloads
