How to clean the filter of my Robot Vacuum

Tapo RV10, Tapo RV10 Lite, Tapo RV10 Plus, Tapo RV20, Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV20 Mop, Tapo RV20 Mop Plus, Tapo RV20 Plus, Tapo RV30, Tapo RV30 Max, Tapo RV30 Max Plus, Tapo RV30 Plus, Tapo RV30C, Tapo RV30C Mop, Tapo RV30C Plus, Tapo RVA100, Tapo RVA101, Tapo RVA102, Tapo RVA103, Tapo RVA200, Tapo RVA300, Tapo RVA400

11-03-2022 22,005

Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device and check either the Datasheet or the firmware section for the latest improvements added to your product.

For RV10 Lite/RV20/RV20 Plus/RV30C

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30 Plus/RV10 Plus/RV20 Mop Plus

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30/RV10/RV20 Mop

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then reinstall the filter as it was originally positioned.